Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S
The AirTAC SAIJ160X100-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel. It provides a usable window of 25-100 mm, letting you dial back the nominal 100 mm stroke by up to 75 mm during commissioning. This bore delivers substantial thrust, generating 9425 N of pull force at 0.5 MPa and reaching 18095 N at 0.9 MPa.
Equipped with a standard carbon steel rod and a PT tapered port thread, this unit includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S Is Used
Variable End-Stop Tuning
Fine-tune the 25-100 mm travel window during machine commissioning to set precise retract positions without adding external physical stops.
Product Changeover
Quickly adapt the cylinder stroke on packaging lines when handling different product sizes, using the 75 mm rear adjuster to accommodate varying dimensions.
Heavy-Duty Positioning
Leverage the 14074 N push force at 0.7 MPa to move heavy fixtures, using the adjustable stopper to set exact end-of-stroke deceleration points.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S the Right Cylinder?
Choose this 160 mm bore when 100 mm bore output is insufficient, as the 100 mm bore yields 3681 N pull at 0.5 MPa compared to this model's 9425 N. An adjustable stroke is selected over a fixed SAI when a machine requires variable end-stops or precise end-position tuning without swapping cylinders. The rear screw acts as a travel stop, not a lock; for load-holding without live air, use an SAIL or BSAI cylinder. To replace an ISO 15552 unit, match the 160 mm bore, 100 mm stroke, 75 mm adjustment, PT G3/4 port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S FAQ
At 0.5 MPa operating pressure, it provides 10053 N of push force and 9425 N of pull force. At 0.9 MPa, the push force reaches 18095 N.
The rear adjuster screw shortens the nominal 100 mm stroke by up to 75 mm, creating a usable travel window of 25-100 mm. It functions as a travel stop to set end positions, not as a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X100-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.