Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S
The AirTAC SAIJ160X1000-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear mechanical stopper for precise end-position tuning. It delivers massive thrust, generating 14074N of push force at 0.7 MPa, making it suitable for heavy-duty industrial applications. The integrated -S magnet enables position feedback via AirTAC CMSE reed and DMSE electronic sensors.
This model features a 1000 mm nominal stroke that can be fine-tuned down by up to 10 mm, creating a 990-1000 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. With a robust 40 mm carbon steel rod and M36x2 thread, it handles high side loads, while the adjustable air cushions at both ends manage deceleration smoothly.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S Is Used
Heavy Press Tuning
Fine-tunes the 990-1000 mm travel window on heavy presses, allowing operators to dial in the exact 10 mm adjustment during setup without swapping cylinders.
Automated Assembly Lines
Handles large product size changes on automated lines by adjusting the rear stopper on the fly, ensuring massive 14074N push force hits the exact target depth.
Long-Stroke Material Handling
Moves heavy payloads over 1000 mm strokes, relying on the 40 mm carbon steel rod and adjustable air cushions to manage deceleration safely.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S the Right Cylinder?
Choose this 160 mm bore when substantial force is required; stepping down to a 125 mm bore reduces the 0.7 MPa push force to 8590N, whereas this cylinder provides 14074N. The 10 mm rear adjuster is ideal for dialing in exact endpoints during machine commissioning or product changeovers without adding external stops. For a fixed end position, a standard SAI cylinder is sufficient, but the SAIJ provides vital flexibility for precision setups.
Because the stroke is 1000 mm, an external guide is strongly recommended to prevent excessive rod deflection and premature seal wear. The rear screw acts as a travel stop, not a lock; the SAIJ cannot hold a load without live air. For true fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. This SKU uses a PT tapered port thread and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S FAQ
At 0.7 MPa operating pressure, this 160 mm bore cylinder provides a push force of 14074N and a pull force of 9425N. At 0.5 MPa, the push force is 10053N.
The rear adjusting screw acts as a mechanical stop, allowing you to trim the effective stroke by up to 10 mm, resulting in a 990-1000 mm travel window. It sets the end position but does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.