Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S
The AirTAC SAIJ160X1000-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 1000 mm nominal stroke that can be dialed back by up to 30 mm, yielding a 970-1000 mm usable travel window for precise end-position tuning. Belonging to the 160 mm bore class, it generates 10053 N of pull force at 0.5 MPa and 14074 N of push force at 0.7 MPa.
This unit includes a standard carbon steel piston rod and a magnet (-S) for electronic DMSE or reed CMSE position sensing. The extruded aluminum barrel incorporates sensor grooves on both sides. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The PT tapered ports and M36x2 rod thread handle high flow and structural loads.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S Is Used
Heavy Press Fine-Tuning
Dial in the 970-1000 mm travel window during setup to perfectly time the pressing stroke without swapping cylinders.
Product Changeover Stops
Quickly adjust the retract position by up to 30 mm on automated lines when switching between product sizes.
Large Fixture Positioning
Use the 10053 N pull force to move heavy fixtures, relying on the rear stopper to set the exact home position.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S the Right Cylinder?
Choose this 160 mm bore cylinder when a 125 mm bore (offering 6136 N push at 0.5 MPa) cannot provide enough force, but a 200 mm bore (delivering 15708 N) would be excessive. The adjustable stroke is selected over a fixed SAI cylinder to fine-tune the retract end-stop during commissioning or product changeovers without adding external stops.
Because the stroke is 1000 mm, the M36x2 rod and carbon steel piston require an external guide to prevent excessive side-loading. This SAIJ model operates at 30-500 mm/s. Remember that the rear adjuster and air cushions only set travel ends and deceleration; they do not hold the load without live air. For true load-holding, select a SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S FAQ
At 0.5 MPa, this 160 mm bore cylinder provides 10053 N of pull force and 14074 N of push force at 0.7 MPa.
The rear adjuster acts as a mechanical stop that trims the 1000 mm nominal stroke back by up to 30 mm, creating a 970-1000 mm adjustable travel window. It decelerates the end of travel but does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.