Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50
The AirTAC SAIJ160X1000-50 is a double-acting ISO 15552 profile cylinder featuring an integrated rear stroke adjuster. It provides a usable travel window of 950-1000 mm, allowing you to dial back the nominal 1000 mm stroke by up to 50 mm during commissioning. Built with a robust 40 mm carbon steel rod and a PT G3/4 port, it generates 10053 N of push force at 0.5 MPa.
This heavy-duty actuator utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed and DMSE electronic sensors. Because the 1000 mm stroke is substantial, an external guide is recommended to manage side loads on the unsupported rod.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50 Is Used
Heavy Press Tuning
Fine-tune the 950-1000 mm travel end-position during machine setup to perfectly dial in high-force pressing operations without external stoppers.
Product Changeover
Quickly adjust the effective stroke by up to 50 mm to accommodate slightly different product lengths on the same heavy-duty assembly line.
Automated Ejection
Utilize the 10053 N thrust at 0.5 MPa to reliably push heavy components out of a mold, adjusting the retract stop to sync with downstream conveyors.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50 the Right Cylinder?
Choose this 160 mm bore when an application requires substantial thrust—stepping down to a 125 mm bore reduces your 0.5 MPa push force to 6136 N. The adjustable stroke is ideal for variable end-stops or product-size changeovers, preventing the need to physically swap cylinders or bolt on external stops. For load-holding without live air pressure, note that the rear adjuster functions only as a travel stop; you would need an SAIL or BSAI series cylinder instead. As an ISO 15552 interchangeable unit, ensure your setup matches the 160 mm bore, 1000 mm stroke, 50 mm adjustment, PT G3/4 port, and standard carbon steel rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50 FAQ
At 0.5 MPa operating pressure, this 160 mm bore cylinder provides 10053 N of push force and 9425 N of pull force. At the maximum 1.0 MPa pressure, it delivers up to 2050 kgf.
The rear adjuster screw acts as a stopper that lets you shorten the effective stroke from the nominal 1000 mm down to 950 mm. It sets the travel end and must not be used as a lock to hold loads without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X1000-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.