Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10
The AirTAC SAIJ160X110-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 10053N push force at 0.5 MPa and allows you to dial back the 110mm nominal stroke by up to 10mm, creating a precise 100-110mm usable travel window for commissioning without adding external stops.
This bore uses a robust 40mm carbon steel rod and M36x2 thread to handle high side loads, while the extruded aluminum barrel includes sensor grooves on both sides. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for position holding, consider a SAIL or BSAI variant.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10 Is Used
Heavy Press Tuning
Fine-tune the 100-110mm travel window during machine setup to set precise pressing depths without machining custom spacers.
Product Size Changeover
Quickly adjust the end-stop by up to 10mm on packaging lines when switching between slightly different product sizes.
High-Force Positioning
Leverage the 10053N push force to move heavy pallets or lifts, using the rear stopper to dial in the exact resting position.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10 the Right Cylinder?
Choose this 160mm bore when you need heavy thrust around 10053N at 0.5 MPa, stepping up from the 125mm bore which yields 6136N. The adjustable stroke is ideal for product changeovers where the exact end-of-stroke varies by up to 10mm, saving you from swapping a fixed-stroke SAI cylinder. Because the stroke is 110mm, side-load is manageable, but always guide the load for long unsupported travels.
When specifying a replacement, match the 160mm bore, 110mm stroke, 10mm adjustment, PT tapered port, and standard carbon steel rod. This SAIJ model supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting the FB, CA, CB, and CR options. No magnet is specified, so CMSE or DMSE sensors cannot be used without adding the -S option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10 FAQ
At 0.5 MPa operating pressure, this 160mm bore cylinder provides a push force of 10053N and a pull force of 9425N. At the maximum 1.0 MPa pressure, the push force reaches 18095N.
The rear adjuster screw lets you shorten the 110mm nominal stroke by up to 10mm, providing a 100-110mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.