Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S
The AirTAC SAIJ160X110-100-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It delivers robust thrust, generating 14074N of push force and 10053N of pull force at 0.7 MPa. Because this specific SKU carries a 100mm adjustment code on a 110mm nominal stroke, you can dial the effective travel back to anywhere within a 10 to 110mm usable window. This extreme adjustability allows operators to set exact retract end-positions during commissioning without swapping out the barrel or adding external stops.
This bore size uses a substantial 40mm carbon steel rod with an M36x2 thread, paired with 50mm of variable air cushioning at both ends to absorb heavy kinetic energy. The barrel is extruded aluminum with sensor grooves on both sides; the included -S magnet enables precise position detection using AirTAC CMSE reed or DMSE solid-state electronic switches. Fluid must be filtered air, operating between 0.15 and 1.0 MPa at temperatures from -20 to +70 C.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S Is Used
Heavy Mold Positioning
Dial in the exact retract distance for heavy industrial molds during machine setup, utilizing the 10 to 110mm travel window to accommodate varying tool lengths.
Product Changeover Lines
Quickly adjust the retract end-stop when switching the manufacturing line to a new product size, eliminating the need to physically swap out pneumatic cylinders.
Press Tonnage Setup
Leverage the 14074N push force at 0.7 MPa for heavy pressing operations, using the 40mm rod and 50mm cushion to absorb high-impact kinetic energy safely.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S the Right Cylinder?
Selecting this 160mm bore adjustable cylinder makes sense when an application demands immense force combined with highly variable end-stop positioning. If you need slightly less thrust, stepping down to a 125mm bore yields 8590N push at 0.7 MPa, but the 160mm provides 14074N for moving heavy jigs or large molds. The 100mm adjustment range is particularly useful on product changeover lines where multiple part sizes require different retract distances. Unlike a fixed-stroke SAI cylinder, this SAIJ variant lets you fine-tune the retract stop mechanically. Remember that the rear adjuster is a travel stop, not a lock; the cylinder will not hold its load without live air pressure. For true load-holding, consider an AirTAC SAIL or BSAI lock variant. This specific configuration includes a PT tapered port, a carbon steel rod, and an -S magnet for CMSE/DMSE sensors. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB/CA/CB/CR).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S FAQ
At 0.7 MPa, this 160mm bore cylinder generates 14074N of push force and 10053N of pull force. It can reach a maximum push force of 18095N at 0.9 MPa.
The rear adjuster acts as a mechanical stop that trims the nominal 110mm stroke. With the 100mm adjustment code, you can fine-tune the usable travel window down to a minimum of 10mm, allowing precise end-positioning without external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X110-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.