Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 125mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke125 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75
The AirTAC SAIJ160X125-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 50 to 125 mm, allowing you to dial back the nominal 125 mm stroke by up to 75 mm during commissioning. This bore size delivers massive thrust, pushing 14074 N and pulling 9425 N at 0.7 MPa.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if needed later. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without adding external stops; it does not hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75 Is Used
Heavy Press Tuning
Dial in the exact 50 to 125 mm press end-position during setup without swapping out the entire cylinder or adding external mechanical stops.
Product Line Changeover
Quickly adapt the stroke window on automated lines when product sizes change, using the 75 mm rear adjustment range to accommodate new travel limits.
Commissioning Calibration
Fine-tune the retract end-position at machine commissioning to absorb mechanical tolerances, ensuring precise heavy-load placement.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75 the Right Cylinder?
Choose this 160 mm bore cylinder when an application requires heavy thrust up to 14074 N (at 0.7 MPa) alongside variable end-position tuning. If you need less force, stepping down to a 125 mm bore provides 8590 N push at 0.7 MPa. The adjustable stroke is ideal for product changeovers, whereas a fixed-stroke SAI cylinder suits dedicated single-purpose stations.
For load-holding without continuous air pressure, select a SAIL pneumatic lock or BSAI clamp-lock cylinder instead, as the SAIJ adjuster is not a brake. This model uses PT tapered G3/4 ports and a carbon steel rod. With a 125 mm stroke, side-load is minimal, but always ensure rigid guiding for heavier attachments. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75 FAQ
At an operating pressure of 0.7 MPa, this 160 mm bore cylinder provides a push force of 14074 N and a pull force of 9425 N. It can deliver a maximum push of 18095 N at 0.9 MPa.
The rear adjusting screw acts as a mechanical stop that allows you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 50 to 125 mm, enabling fine-tuning of the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X125-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.