Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10
The AirTAC SAIJ160X130-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers massive thrust, pushing 18095N at 0.9 MPa, while its external stopper screw provides a 120-130 mm usable travel window for precision end-position tuning. The carbon steel rod and M36x2 thread provide robust resistance to side loads, though long unsupported strokes still require an external guide.
This adjustable-stroke design allows you to fine-tune the retract position at commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop to set deceleration, not as a lock, meaning it will not hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series instead.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10 Is Used
Heavy Press Fine-Tuning
Dial in the exact 120-130 mm retract distance during heavy press commissioning without machining new external stopper blocks.
Product Size Changeover
Quickly adjust the end-stop position on a production line when shifting between heavy product variants, saving setup time.
High-Force End Positioning
Leverage 18095N of thrust at 0.9 MPa to move massive loads while relying on the rear screw for final position trimming.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10 the Right Cylinder?
Choose this 160 mm bore when you need extreme force, such as stepping up from a 125 mm bore that provides 11045N of push force at 0.9 MPa. The SAIJ160X130-10 is selected over a fixed SAI cylinder when a machine setup requires a variable end-stop to dial in the exact retract distance within that 120-130 mm window. It uses a PT tapered port and supports the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
When ordering, verify the bore, 130 mm nominal stroke, 10 mm adjustment, PT port, and mounting style. Because the stroke is under 300 mm, side-load risks are lower, but the 40 mm rod diameter still handles substantial lateral stress. If position holding is required without live air pressure, this cylinder cannot act as a brake; you must integrate an external pilot-operated check valve or switch to a SAIL lock cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10 FAQ
At 0.9 MPa, this 160 mm bore cylinder provides 18095N of push force and 9425N of pull force at 0.5 MPa. The maximum thrust is 2050 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the 130 mm nominal stroke by up to 10 mm, creating a 120-130 mm usable travel window. The adjuster acts as a mechanical stop for deceleration, not a lock, so it cannot hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X130-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.