Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 15mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke15 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S
The AirTAC SAIJ160X15-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers immense thrust, yielding 10053N of pull force at 0.5MPa and 18095N of push force at 0.9MPa. The integrated -S magnet supports CMSE reed and DMSE electronic solid-state sensors for precise end-position detection.
With a 15mm nominal stroke and a 10mm adjustment range, this unit provides a usable travel window of 5 to 15mm. This built-in adjuster acts as a mechanical stop to fine-tune the retract end without adding external blocks. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rod with an M36x2 thread handles heavy side loads effectively.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S Is Used
Short-Stroke Pressing
Dial in the exact 5 to 15mm travel needed for high-force stamping or pressing operations during initial tooling setup.
Product Changeover
Quickly adjust the end-stop distance on a packaging line when switching to a slightly different product thickness without changing cylinders.
Heavy-Duty Clamping
Secure massive workpieces using 18095N of push force at 0.9MPa, relying on the M36x2 threaded carbon steel rod for robust actuation.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S the Right Cylinder?
Select this 160mm bore cylinder when an application demands massive clamping or pressing force within a very short distance, stepping down from a 200mm bore that offers 15080N of pull at 0.5MPa. The adjustable stroke is ideal for fine-tuning the end-stop during machine commissioning or product changeover, preventing the need to swap out a fixed-stroke SAI cylinder.
For load-holding without live air pressure, note that the rear adjuster is strictly a travel stop and not a lock; you would need an SAIL or BSAI cylinder for secure positioning. This SAIJ160X15-10-S uses a PT tapered port, supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set, and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S FAQ
At 0.5MPa, it provides 10053N of pull force and 14074N of push force. At 0.9MPa, the push force increases to 18095N.
The rear adjuster screw lets you mechanically shorten the stroke from the nominal 15mm down to 5mm, giving a usable travel window of 5-15mm. It acts as a stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X15-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.