Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 165mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke165 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S
The AirTAC SAIJ160X165-75-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a 10053N pull force at 0.5 MPa and features a usable travel window of 90-165mm, letting you dial back the 165mm nominal stroke by up to 75mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This unit comes with a -S magnet for position sensing and is compatible with AirTAC CMSE reed and DMSE solid-state switches. It uses a robust 40mm carbon steel rod with an M36x2 thread and PT tapered ports. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S Is Used
Product Changeover
Quickly shift the end-of-stroke position by up to 75mm to accommodate varying product lengths on the same line without mechanical rebuilds.
Press Stroke Tuning
Fine-tune the 90-165mm travel window during machine setup to ensure exact contact depth for high-force pressing operations.
Heavy Automation
Leverage the 10053N pull force for moving heavy pallets, with the rear stop providing a hard physical limit at the end of travel.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S the Right Cylinder?
Choose this 160mm bore when a 100mm bore (5497N push at 0.5MPa) is insufficient or a 200mm bore (15708N push) is excessive. The 75mm adjustment range is ideal for product-size changeovers, allowing you to fine-tune the end stop without swapping the cylinder or adding external stops. For load-holding without live air, select a SAIL or BSAI cylinder instead, as this adjuster is not a lock.
To replace an ISO 15552 cylinder, match the 160mm bore, 165mm stroke, 75mm adjustment, PT G3/4 ports, and -S magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 165mm stroke exceeds 300mm? No, but for any longer unsupported travel, external guides are recommended to manage side loads on the 40mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S FAQ
At 0.5 MPa operating pressure, this 160mm bore cylinder provides 10053N of push force and 9425N of pull force. It can reach up to 18095N push at 0.9 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the 165mm nominal stroke down to a minimum of 90mm. It sets the travel end-point but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X165-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.