Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10
The AirTAC SAIJ160X195-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers robust thrust, yielding 14074N push force at 0.7MPa and 9425N pull force. The integrated rear screw allows you to fine-tune the end position, creating a usable travel window between 185 and 195mm for this specific 195mm nominal stroke.
Built with an extruded aluminum barrel and sensor grooves on both sides, this unit omits the -S magnet, meaning it will not host CMSE or DMSE position sensors without modification. The carbon steel piston rod and M36x2 thread provide high structural rigidity, while the PT tapered port threads ensure a tight pneumatic connection. The adjustment mechanism serves purely as a travel stop, not a load lock.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10 Is Used
Press Stroke Tuning
Dial in the exact clamping end-position on a heavy assembly press by adjusting the rear screw within the 185-195mm window, ensuring precise material deformation without machinery changes.
Machine Commissioning
Fine-tune the retract distance during initial machine setup, using the 10mm adjuster to perfectly align heavy tooling without fabricating custom external stopper blocks.
Product Size Changeover
Accommodate slight variations in heavy product dimensions on a production line by trimming the cylinder's effective stroke back by a few millimeters during format changes.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10 the Right Cylinder?
Select this 160mm bore actuator when an application requires heavy thrust but demands exact end-position tuning during commissioning without adding external stops. If your force requirements are lower, stepping down to a 125mm bore yields 8590N push at 0.5MPa; stepping up to a 200mm bore provides 21991N push at 0.7MPa. Because the 195mm stroke is under the 300mm side-load threshold, standard mounting is less critical, but an external guide is still recommended for heavy lateral loads.
This model is dimensionally interchangeable per ISO 15552. To match this SKU exactly when replacing a cylinder, verify the 160mm bore, 195mm stroke, 10mm adjustment range, PT port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember that the rear adjuster cannot hold a load without continuous air pressure; for true fail-safe load holding, consider the BSAI clamp-lock series or an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10 FAQ
At 0.7 MPa, this 160mm bore cylinder provides 14074N of push force and 13205N of pull force. At 0.9 MPa, the push force increases to 18095N.
The rear adjuster screw lets you shorten the 195mm nominal stroke by up to 10mm, providing a usable travel window of 185-195mm. This stopper only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X195-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.