Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S
The AirTAC SAIJ160X200-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers a 10053N pull force at 0.5 MPa and features a carbon steel piston rod with an M36x2 thread. Because the nominal 200mm stroke can be dialed back by up to 100mm, this SKU yields a highly flexible 100-200mm usable travel window for precise end-position tuning.
This model includes a magnetic piston (-S) for position sensing with AirTAC CMSE reed and DMSE electronic switches. It uses a PT tapered port and relies on variable air cushions at both ends to decelerate the load. The rear adjuster acts purely as a mechanical stop to set the travel end, meaning it cannot hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S Is Used
Variable End-Stop Tuning
Dial in the exact retract distance between 100mm and 200mm during machine setup to accommodate different product sizes without swapping cylinders.
Heavy Assembly Pressing
Leverage the 10053N pull force to seat large components securely, using the rear adjuster to prevent over-travel and damage.
Changeover Calibration
Quickly recalibrate the stroke end-position on automated lines handling varied material batches using the integrated stopper screw.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S the Right Cylinder?
Choose this 160mm bore when an application requires heavy thrust—stepping down to a 125mm bore drops the 0.5MPa pull force to 5734N. Selecting the SAIJ adjustable type over a fixed-stroke SAI cylinder allows you to fine-tune the retract position during commissioning or product changeovers without adding external stops. For load-holding without continuous air pressure, this cylinder is insufficient; consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
When replacing an ISO 15552 cylinder, match the 160mm bore, 200mm nominal stroke, 100mm adjustment range, PT port thread, and the required -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR brackets. Although the 200mm stroke is below the 300mm side-load threshold, the robust 40mm rod and M36x2 thread handle high mechanical stress effectively.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 100mm from the 200mm nominal length, creating a 100-200mm travel window. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
At 0.5 MPa, it provides a 10053N pull force and a 14074N push force at 0.7 MPa. The maximum thrust is 2050 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.