Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40
The AirTAC Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 105mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke105 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40
The AirTAC SAIJ80X105-40 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers a robust 2513N push force at 0.5 MPa and features a 25mm carbon steel piston rod with an M20x1.5 thread. By turning the rear screw, you achieve a usable travel window of 65-105mm, allowing precise end-position tuning without swapping hardware.
This extruded aluminum barrel utilizes a PT tapered G3/8 port and includes variable air cushions at both ends to decelerate the load smoothly. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear stopper sets the retract distance but does not lock the load; for dead-pilot holding, consider SAIL or BSAI variants.
Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40 Is Used
Product Changeovers
Dial in the 65-105mm stroke window during format changes on packaging lines without bolting on new external stops.
End-Position Tuning
Fine-tune the retract distance at commissioning to compensate for mechanical wear or sensor variance.
Assembly Pressing
Leverage the 2513N push force to seat components, using the adjustable stop to prevent over-travel.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40 the Right Cylinder?
Choose this 80mm bore when an application requires higher thrust than a 63mm cylinder (which provides 1559N at 0.5 MPa) but has spatial constraints limiting a 100mm bore. The 40mm adjustment range is ideal for product changeovers on a packaging line, letting operators dial in the exact 65-105mm stroke on the fly instead of installing external physical stops.
When replacing an ISO 15552 cylinder, verify the 105mm stroke, 40mm adjuster, PT G3/8 port, and required mounting bracket. Because the stroke is 105mm, the 25mm rod handles side loads well, but any application approaching the 30-800mm/s speed range should still use an external guide to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40 FAQ
At 0.5 MPa operating pressure, this 80mm bore cylinder provides 2513N of push force and 2268N of pull force. At 0.7 MPa, the push force increases to 3518N.
The rear adjuster acts as a mechanical stop, allowing you to shorten the nominal 105mm stroke by up to 40mm. This creates a usable travel window of 65-105mm, which can be fine-tuned during setup without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80X105-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.