Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S
The AirTAC Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 170mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke170 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S
The AirTAC SAIJ80X170-50-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 170 mm nominal stroke that can be dialed back by up to 50 mm, providing an effective 120-170 mm usable travel window for precise end-position tuning at commissioning. Delivering 2513 N of push force at 0.5 MPa, it handles demanding positioning tasks.
This model includes a magnetic piston (-S) for position sensing via CMSE reed or DMSE electronic switches. It uses a PT tapered port and a robust 25 mm carbon steel rod with an M20x1.5 thread, providing high side-load resistance. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S Is Used
Product Changeover
Dial in the 120-170 mm stroke window during format changes on packaging lines without swapping out the entire actuator.
End-Stop Calibration
Use the rear adjuster to precisely set the retraction end position during machine commissioning, avoiding costly mechanical shimming.
Variable Positioning
Adapt the travel distance on the fly for assembly stations processing parts of varying heights within the 50 mm adjustment range.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S the Right Cylinder?
Select this 80 mm bore when an application requires substantial thrust, such as 2513 N push at 0.5 MPa, combined with variable end-stops for product changeovers. If your setup needs less force, stepping down to a 63 mm bore yields 1559 N push at 0.5 MPa. The rear adjusting screw acts purely as a travel stop to fine-tune the 120-170 mm window without adding external stops; it does not hold the load without live air. For load-holding requirements, consider an external rod lock or the AirTAC SAIL series.
Because the 170 mm stroke exceeds 300 mm? No, but even at 170 mm, ensure external guiding for heavy loads to prevent rod binding. To replace an ISO 15552 cylinder, match the 80 mm bore, 170 mm stroke, 50 mm adjustment, PT G3/8 port, and the -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S FAQ
At 0.5 MPa operating pressure, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 170 mm down to 120 mm. This stopper fine-tunes the retraction end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80X170-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.