Airtac SAUD Double Rod Cylinder SAUD100X950
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X950 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 950mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke950 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X950
The AirTAC SAUD100X950 is a double-acting double-rod profile cylinder with a 100 mm bore and 950 mm stroke. Because a rod exits both ends, the effective area is identical in each direction, yielding an equal force of 3681 N both ways at 0.5 MPa. The extruded hard-anodized aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It features a 1/2 inch port and M20x1.5 rod threads.
This SKU has no magnet (-S omitted), so it cannot accept CMSG or DMSG reed switches. The standard TPU seals handle -20 to +70 C, while a Viton H option extends this to 0-150 C.
Airtac SAUD Double Rod Cylinder SAUD100X950 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X950 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X950
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X950 Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, ensuring perfectly balanced cutting feed without torsional twist.
Dual Transfer Arms
Powers opposing transfer arms that move parts across a conveyor simultaneously, keeping the payload centered.
Vertical Lift Fixture
Lifts heavy pallets straight up using the equal push and pull force, relying on external linear rails for stability.
Is the Airtac SAUD Double Rod Cylinder SAUD100X950 the Right Cylinder?
When sizing this 100 mm bore actuator, note the equal both-ways thrust is 3681 N at 0.5 MPa. If you need less force, the 80 mm bore provides 2268 N both ways; if you need more, 100 mm is the largest available SAUD size. Choose this double-rod model for anti-rotation guidance, driving two tools at once, or mounting a cam on the back rod. Mounting is limited to Basic, FA, and LB types compatible with the AirTAC SC series. Because the 950 mm stroke is long, always use external guides to prevent rod bending and side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X950 FAQ
The force is equal in both directions because of the double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port feeds both chambers equally.
This SKU lacks the -S magnet, so it cannot take magnetic switches. A plain cylinder also drifts on air loss; the 29 mm cushions only decelerate near stroke end. Use an external rod lock or pilot-operated check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X950
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.