Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A
The SAUF100X600S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310-10 5/2 solenoid valve on the cap. One AC220V coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. This 100mm bore unit pushes 3927N and pulls 3681N at 0.5MPa, operating via a 1/2" cylinder port and an M20x1.5 rod thread.
The integrated valve provides a 3/8" port with 30mm2 flow (Cv 1.68) and switches up to 4 cycles per second. Because the valve routes air rather than locking it, add an external rod lock for held loads. Based on the 0.5MPa push force, the safe working load is roughly 2356N, translating to a 200kg vertical lift with a 2:1 margin. The piston includes a magnet for position sensing.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A Is Used
Pallet Divertor
Uses the 600mm stroke to push heavy pallets off a main conveyor line, driven entirely by its own 4M310 valve without manifold tubing.
Vertical Lift Gate
Raises a 200kg access gate using the 100mm bore, relying on the AC220V coil signal for decentralized actuation at the far end of a facility.
Heavy Part Ejector
Ejects finished machined parts from a press, utilizing the 29mm adjustable cushions to decelerate the high 6282N force at 0.8MPa safely.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A the Right Choice?
Size this 100mm bore against the 63mm and 80mm options, using the 3927N push force at 0.5MPa to match your load. The safe working load is about 2356N. Confirm the AC220V terminal entry and PT thread meet your electrical standards. The cylinder body rates to 1.0MPa, but you must size force within the built-in valve's 0.15-0.8MPa operating window. The rod retracts when the coil energises; reposition the valve to switch to extend-when-energised. For the 600mm stroke, use external guides to prevent rod bending and side-load wear. This unit does not hold loads without air pressure.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A FAQ
It generates 3927N push and 3681N pull at 0.5MPa, reaching 6282N at 0.8MPa. The built-in valve is a 4M310-10 with a 3/8" port, Cv 1.68, and 30mm2 flow. The coil is AC220V with terminal entry. Although the cylinder body rates to 1.0MPa, the assembled unit must operate within the valve's 0.15-0.8MPa range.
No, the built-in valve only routes air and is not a load lock. If air is lost, the piston will drift. To maintain a vertical or suspended load, you must install an external pilot-operated check valve or a mechanical rod lock.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.