Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 75mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke75 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A
The AirTAC SAUF100X75-10A is a double-acting profile cylinder with a built-in 4M310 5/2 solenoid valve on the cap. One AC220V coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. This 100mm bore has a 1/2" cylinder port, an M20x1.5 rod thread, and 29mm adjustable cushions.
Operating strictly within the 0.15-0.8 MPa valve window, it delivers 3927N push force at 0.5 MPa. The integrated 4M310-10 valve has a 3/8" port, Cv 1.68, and cycles up to 4 times per second. For sizing, the safe working load is roughly 2356N, allowing a vertical lift of about 200kg with a 2:1 margin. This terminal-entry, PT-thread SKU lacks a magnet and cannot accept a sensor.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×75 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A Is Used
Heavy Press Stand
Decentralized pressing station using one coil signal to drive the 100mm bore, saving manifold space on the main press line.
Pallet Diverter
Directs heavy pallets on a conveyor with local actuation, eliminating long tubing runs back to a central valve island.
Material Lift Gate
Operates a lifting gate independently within a large storage machine, cutting installation time and simplifying plumbing.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A the Right Choice?
Size against the 63mm and 80mm neighbours: this 100mm bore pushes 3927N at 0.5 MPa versus 2513N for the 80mm. Confirm the AC220V terminal entry suits your control voltage. Default action retracts the rod when energised; reposition the valve to extend on signal. Size force within the 0.15-0.8 MPa valve range, never the 1.0 MPa cylinder body rating. The built-in valve routes air but does not lock the piston; add an external rod lock or pilot-operated check valve to hold loads safely.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A FAQ
It pushes 3927N and pulls 3681N at 0.5 MPa. The built-in valve is a 4M310-10 with a 3/8" port, Cv 1.68, and an AC220V terminal-entry coil. Despite the cylinder body rating of 1.0 MPa, you must size force within the 0.15-0.8 MPa operating window of the assembled valve.
Yes. The default action retracts the rod when energised, but you can reposition the valve to extend on signal. The valve only routes air; it is not a load lock. The piston will drift on air loss, so add an external rod lock or pilot-operated check valve for load holding.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X75-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.