Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A is a genuine double-acting profile-type cylinder with a Ø32mm bore, 160mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke160 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A
The SAUF32X160S-06A is a double-acting profile cylinder with a built-in AirTAC 4M210-06 5/2 solenoid valve on the cap. One AC220V coil signal drives the actuator directly, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 unit of the same bore. It features a 1/8" cylinder port, an M10x1.25 rod thread, and a piston magnet for CMSG/DMSG/EMSG switches.
Operating within the 0.15-0.8 MPa valve window, this 32mm bore delivers a 402N push force at 0.5MPa. The integrated valve flows 14mm2 (Cv 0.78) at up to 5 cycles/sec. For sizing, the safe working load is roughly 241N (about 60% of the 0.5MPa push), and it can vertically lift around 20kg with a 2:1 margin. The valve routes air but does not lock the load without pressure.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/8" |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 32×160 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A Is Used
Decentralized Clamping
Ideal for independent clamping stations on a large fixture, switching directly from one AC220V signal without running tubes back to a central manifold.
Inline Diverting
Mounts directly on a conveyor frame to actuate a divert gate. The compact profile saves space while the built-in valve handles 5 cycles/sec.
Modular Pick & Place
Perfect for small individual pick-and-place heads where the 1/8" ported 4M210 valve provides rapid local actuation without complex air routing.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A the Right Choice?
Size force between the 0.15-0.8 MPa valve limits, not the 1.0 MPa cylinder body rating. At 0.5MPa this 32mm bore pushes 402N; if you need more thrust, step up to the 40mm bore (628N). Confirm the AC220V terminal entry matches your supply. By default the rod retracts when energised; you can reconfigure it to extend-when-energised by repositioning the valve. The 4M210-06 valve routes air but is not a lock—add an external rod lock or pilot-operated check valve to hold a load. For this 160mm stroke, side-load is minimal, but always guide the rod for longer travels.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A FAQ
It pushes 402N and pulls 345N at 0.5MPa. The built-in valve is a 4M210-06 (1/8" port, Cv 0.78, 5 cycles/sec) running on AC220V. Although the cylinder body rates to 1.0MPa, the assembled unit must operate within the 0.15-0.8MPa valve window.
The default action retracts the rod when energised. You can reconfigure it to extend-when-energised simply by repositioning the valve. The valve only routes air, so it cannot hold a load without air pressure—add a rod lock for suspended loads.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X160S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.