Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A is a genuine double-acting profile-type cylinder with a Ø63mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A
The SAUF63X1000-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The 63mm bore delivers 1559N push at 0.5MPa, scaling to 2494N at the 0.8MPa assembled maximum. It uses a 3/8 inch valve port with a Cv of 1.68 and a 3/8 inch cylinder port.
The integrated valve operates at 0.15-0.8 MPa, so size force within that window rather than the 1.0 MPa cylinder body rating. The AC220V terminal-entry coil is IP65 rated and switches up to 4 cycles per second. Based on the 0.5MPa push force, the safe working load is about 935N, translating to a vertical lift capacity of roughly 79kg with a 2:1 margin. This 1000mm stroke unit has no magnet and cannot accept a sensor.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A Is Used
Long-Stroke Diversion
Decentralized 1000mm pusher on a packaging line. The built-in valve removes long tube runs back to a central manifold, keeping response times fast.
Vertical Material Gate
Lifting a 79kg gate assembly. The integrated 4M310 valve handles the 3/8 inch porting locally, simplifying machine wiring.
Independent Clamp Station
A standalone clamping actuator on a large welding fixture. One AC220V signal controls the full 1559N clamping force without a remote valve island.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A the Right Choice?
When sizing, compare neighbouring bores: the 50mm bore offers 982N push while the 80mm bore provides 2513N at 0.5MPa. This 63mm unit delivers 1559N push and 1402N pull at 0.5MPa. Confirm the AC220V terminal entry and PT threads suit your supply. The rod retracts when the coil energises, but you can reposition the valve to extend on signal. Because the 4M310 valve routes air, it is not a load lock; add an external rod lock or pilot-operated check valve to hold a load. With a 1000mm stroke, use an external guide to prevent rod bending and side loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A FAQ
It provides 1559N push and 1402N pull at 0.5MPa, reaching 2494N push at 0.8MPa. The built-in valve is a 4M310-10 5/2 solenoid with a 3/8 inch port, Cv 1.68, and a 4 cycle/s limit. The AC220V terminal-entry coil is IP65 rated. You must size force within the 0.15-0.8 MPa valve operating window, not the 1.0 MPa cylinder body rating.
No. The built-in 4M310 valve routes air but does not lock the piston. If air is lost, the load drifts. For vertical holding, install an external rod lock or pilot-operated check valve. Also, since this SKU lacks a magnet, it cannot accept a magnetic switch.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X1000-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.