Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A is a genuine double-acting profile-type cylinder with a Ø63mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A
The SAUF63X100S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the cylinder, saving a manifold slot and tubing. The 63mm bore delivers a 1559N push at 0.5MPa, and the integrated -S piston magnet supports CMSG/DMSG/EMSG switches.
The integrated 4M310-10 valve has a 3/8" port, Cv 1.68, and runs at 4 cycles/sec. The cylinder body rates to 1.0MPa, but size force within the valve's 0.15-0.8MPa window. Based on the 0.5MPa push, the safe working load is about 935N, giving a vertical lift capacity of roughly 79kg with a 2:1 margin. The cylinder port is 3/8" with a PT thread.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A Is Used
Decentralized Clamping
Ideal for a large machining cell where each clamping station switches itself via one AC220V signal, eliminating a central valve manifold.
Inline Diverting
Perfect for a conveyor diverter arm; the built-in 4M310 valve handles the 4 cycle/sec actuation without remote plumbing delays.
Package Sorting
Great for a decentralized package reject gate where saving tubing runs to a main panel is critical for machine uptime.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A the Right Choice?
Size against the 50mm bore (982N push) or 80mm bore (2513N push) at 0.5MPa. This 63mm bore pushes 1559N and pulls 1402N at 0.5MPa. Confirm the AC220V coil and terminal entry. The rod retracts when energised; reposition the valve to extend on energisation. Operate within the 0.15-0.8MPa valve range, not the 1.0MPa cylinder rating. The valve routes air and is not a lock; add an external rod lock or pilot-operated check valve to hold loads. For this 100mm stroke, side-load is minimal, but always guide loads over 300mm.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A FAQ
It pushes 1559N and pulls 1402N at 0.5MPa. The built-in valve is a 4M310-10 with a 3/8" port and Cv 1.68. The coil is AC220V with terminal entry. Although the cylinder body rates to 1.0MPa, the assembled unit operates at 0.15-0.8MPa.
By default the rod retracts when the coil is energised; you can reposition the valve to extend on energisation. The valve only routes air, so it is not a load lock. For load holding on air loss, add an external rod lock or pilot-operated check valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X100S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.