Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A is a genuine double-acting profile-type cylinder with a Ø63mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A
The SAUF63X150S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 unit of the same bore. It features a 3/8" cylinder port, an M16x1.5 rod thread, and a piston magnet for position sensing.
Operating within the valve's 0.15-0.8 MPa range, it delivers a 1559 N push force at 0.5 MPa. The integrated valve provides a 3/8" port, Cv 1.68 flow, and switches up to 4 cycles per second. The AC220V terminal entry coil is IP65 rated. For sizing, the safe working load is roughly 935 N, and it can vertically lift about 79 kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A Is Used
Modular Clamping Stations
Ideal for decentralized machining cells where each clamp actuates independently from a single coil signal, saving manifold space.
Inline Diverters
Provides rapid sorting on conveyors. The integrated 4M310 valve handles 4 cycles per second for high-throughput routing.
Vertical Lift Gates
Suitable for material handling lifts. With a safe working load near 935 N, it easily manages vertical loads under 79 kg.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A the Right Choice?
When sizing, compare neighbouring bores: the 50 mm bore pushes 982 N while the 80 mm bore pushes 2513 N at 0.5 MPa. This 63 mm model pushes 1559 N and pulls 1402 N at 0.5 MPa. Always size force within the 0.15-0.8 MPa valve window, not the 1.0 MPa cylinder body rating. Confirm the AC220V terminal entry and PT thread meet your electrical specs. The rod retracts when the coil is energised; reposition the valve to switch to extend-when-energised. Because the valve only routes air, add an external rod lock or pilot-operated check valve to hold loads safely. For this 150 mm stroke, ensure adequate side-load guidance.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A FAQ
It pushes 1559 N and pulls 1402 N at 0.5 MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68). The cylinder body rates to 1.0 MPa, but you must size force within the valve's 0.15-0.8 MPa operating window. The coil is AC220V with terminal entry.
No. The built-in valve routes air but does not lock the piston. If air is lost, the load drifts. For load holding, install an external rod lock or pilot-operated check valve. The default action retracts the rod when energised, but you can reposition the valve to extend on signal.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X150S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.