Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A is a genuine double-acting profile-type cylinder with a Ø63mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A
The SAUF63X700S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One AC220V coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. This 63mm bore delivers 1559N push and 1402N pull at 0.5MPa, with a 3/8" cylinder port and an M16x1.5 rod thread. The S suffix means a piston magnet is present for CMSG/DMSG/EMSG switches.
The integrated 4M310-10 valve has a 3/8" port, Cv 1.68 flow, and handles 4 cycles per second. Size force within the 0.15-0.8MPa valve window, not the 1.0MPa cylinder body rating. Computed buyer insight: safe working load is about 935N (60% of the 0.5MPa push), allowing a 79kg vertical lift with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A Is Used
Decentralized Divert Gate
Switches a sorting diverter directly at the station using one coil signal, removing the need to run long control lines back to a central valve manifold.
Independent Lift Station
Drives a localized lifting probe in a storage system, saving a manifold slot and simplifying tubing for standalone actuators spread across a large frame.
Remote Clamp Fixture
Actuates a clamping arm on a distant welding cell, relying on the integrated 4M310 valve to handle local actuation without extra plumbing complexity.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A the Right Choice?
Size between the 50mm bore (982N push) and the 80mm bore (2513N push) at 0.5MPa. This 63mm bore gives 1559N push. Confirm the AC220V terminal entry and PT thread. The default action retracts the rod when energised, but you can reposition the valve to extend on signal. Keep pressure within the 0.15-0.8MPa valve range. The built-in valve routes air but does not lock; add an external rod lock or pilot-operated check valve to hold a load. For this 700mm stroke, use external guides to prevent rod bending and side-load damage.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A FAQ
It delivers 1559N push and 1402N pull at 0.5MPa. The built-in valve is a 4M310-10 with Cv 1.68 and a 3/8" port. The coil is AC220V with terminal entry. You must size force within the 0.15-0.8MPa valve operating window, even though the cylinder body rates to 1.0MPa.
Yes. The default action retracts the rod when energised, but you can reconfigure it to extend by repositioning the valve. This self-switching design means no remote valve is needed, saving tubing and a manifold slot.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.