Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A is a genuine double-acting profile-type cylinder with a Ø80mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A
The SAUF80X1000S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. This 80mm bore includes a piston magnet for switches, a 25mm rod, and 3/8 inch cylinder ports.
Operating within the valve's 0.15-0.8 MPa window, it delivers 2513 N push at 0.5 MPa. The 3/8 inch valve port yields 30 mm2 flow (Cv 1.68) at up to 4 cycles/s. The AC220V terminal coil is IP65 rated. Computed buyer insight: safe working load is roughly 1508 N, allowing a 128 kg vertical lift with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 80×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A Is Used
Pallet Diversion
Decentralized sorting gate on a conveyor. The integrated valve switches the 1000mm stroke directly at the divert arm without a remote manifold.
Vertical Lift Gate
Lifting a 128 kg safety gate. The built-in 4M310 valve provides fast local actuation, saving tubing runs across the facility.
Long-Stroke Material Pusher
Ejecting parts from a large machine bed. The 80mm bore pushes 2513 N at 0.5 MPa with one coil signal driving the full 1000mm extension.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A the Right Choice?
Size by force and neighbors: the 63mm bore pushes 1559 N at 0.5 MPa, while the 100mm bore reaches 3927 N. This 80mm bore pushes 2513 N and pulls 2268 N at 0.5 MPa. Confirm the AC220V terminal entry and PT threads. The cylinder body rates to 1.0 MPa, but the integrated valve limits operation to 0.15-0.8 MPa. The rod retracts when energized; reposition the valve to extend on signal. The valve only routes air, so add an external rod lock or pilot-operated check valve to hold loads. For the 1000mm stroke, use external guides to prevent rod bending and side loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A FAQ
It pushes 2513 N and pulls 2268 N at 0.5 MPa. The built-in valve is a 4M310-10 (3/8 inch port, Cv 1.68, 4 cycles/s max). The coil is AC220V terminal entry. Size force within the valve's 0.15-0.8 MPa window, not the 1.0 MPa cylinder body rating.
Yes. The default action retracts the rod when energized, but you can reposition the valve to extend on signal. Because the valve only routes air, use an external rod lock or pilot-operated check valve to hold the load if air is lost.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.