Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A is a genuine double-acting profile-type cylinder with a Ø80mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A
The AirTAC SAUF80X175-10A is a double-acting profile cylinder with a built-in 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. It features a 25mm rod, M20x1.5 rod thread, and 3/8" cylinder port.
The integrated 4M310-10 valve provides 3/8" porting with a 30 mm2 flow (Cv 1.68) and handles up to 4 cycles per second. The AC220V terminal-entry coil is IP65 rated with a response under 0.05s. Size force within the 0.15-0.8 MPa valve window, not the 1.0 MPa cylinder body rating. At 0.5 MPa it pushes 2513 N, giving a safe working load of roughly 1508 N and a vertical lift capacity of about 128 kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 80×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A Is Used
Decentralized Press Clamps
Actuates individual clamping stations directly from the cylinder cap, removing long tube runs back to a central manifold in large stamping lines.
Independent Diverters
Powers localized sorting gates where each actuator needs its own dedicated 4M310 valve signal without consuming manifold space.
Vertical Lift Stops
Controls heavy pallet stops using the 80mm bore force, relying on the integrated valve for fast 4 cycle/sec response.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A the Right Choice?
Select between the 63mm bore (1559 N push @0.5 MPa) and the 100mm bore (3927 N push @0.5 MPa) based on your load. This 80mm bore delivers 2513 N push and 2268 N pull at 0.5 MPa, peaking at 4021 N at the 0.8 MPa assembled limit. Confirm the AC220V terminal entry matches your supply. The rod retracts when energised but can be reconfigured to extend by repositioning the valve. The valve routes air and does not hold the load on pressure loss; add an external rod lock or pilot-operated check valve for holding. For this 175mm stroke, ensure standard side-load guidance. This SKU lacks a magnet and cannot accept a sensor.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A FAQ
It delivers 2513 N push and 2268 N pull at 0.5 MPa, reaching 4021 N at 0.8 MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68, 30 mm2 flow). The AC220V coil operates at 0.15-0.8 MPa. You must size within this valve window, as the 1.0 MPa cylinder body rating does not apply to the assembled unit.
No, this specific SKU lacks the -S magnet option and cannot accept a sensor. The default action retracts the rod when the coil is energised. You can reconfigure it to extend-when-energised by physically repositioning the built-in valve. The valve only routes air; it is not a load lock.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.