Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B is a genuine double-acting profile-type cylinder with a Ø80mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B
The SAUF80X80S-10B is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. The bore sets the 3/8" air port and M20x1.5 rod thread, while the valve port is 3/8".
Operating in the 0.15-0.8 MPa valve window, it delivers 2513 N push at 0.5 MPa. The 4M310-10 valve provides 30 mm2 flow (Cv 1.68) at up to 4 cycles/s. The DC24V terminal coil is IP65 rated. With a piston magnet for CMSG/DMSG/EMSG switches, the safe working load is about 1508 N, allowing a vertical lift of roughly 128 kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 80×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B Is Used
Decentralized Diverters
Drives individual lane diverters directly at the conveyor edge, using one DC24V signal per actuator without routing tubes back to a central manifold.
Independent Stack Gates
Controls separate pallet stacker gates in a high-rise storage system, saving manifold slots while providing 1508 N safe working load per station.
Modular Forming Presses
Actuates clamps across multiple forming cells. The built-in 4M310 valve handles 4 cycles/s, delivering rapid 2268 N pull at 0.5 MPa right at the tool.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B the Right Choice?
Size between the 63 mm bore (1559 N push @0.5 MPa) and the 100 mm bore (3927 N push @0.5 MPa). This 80 mm bore yields 2513 N push and 2268 N pull at 0.5 MPa. Confirm the DC24V terminal entry and PT threads suit your control panel. The rod retracts when the coil energises; reposition the valve to extend on signal. Size force within the 0.15-0.8 MPa valve range, not the 1.0 MPa cylinder body rating. The valve routes air and is not a lock—add an external rod lock or pilot-operated check valve to hold a load. For this 80 mm stroke, side-load guides are optional but recommended for rigid stability.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B FAQ
It pushes 2513 N and pulls 2268 N at 0.5 MPa, reaching 4021 N push at 0.8 MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68, 30 mm2 flow, max 4 cycles/s). The DC24V terminal coil is IP65. Size the force within the 0.15-0.8 MPa valve operating window, never the 1.0 MPa cylinder body rating.
Yes. The default action retracts the rod when the coil is energised, but you can reposition the valve to extend on signal. The valve only routes air; it is not a load lock. The piston will drift on air loss, so add an external rod lock or pilot-operated check valve for suspended loads.
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X80S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.