Airtac SC100 Standard Cylinder SC100X100SFB
The AirTAC Airtac SC100 Standard Cylinder SC100X100SFB is a genuine double-acting standard air cylinder with a Ø100mm bore and 100mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke100 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X100SFB
The SC100X100SFB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (up to 7068 N at 0.9 MPa). With a 100 mm stroke and a 25 mm diameter piston rod, this model is built for short, powerful linear moves in compact automation cells.
This configuration includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and an FB rear rectangular flange (F-SC100FB) for secure end-face mounting. The body length A is 188 mm, giving a total extended length of approximately 288 mm.
Airtac SC100 Standard Cylinder SC100X100SFB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X100SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X100SFB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X100SFB Is Used
Pallet Stop & Lift
The 3927 N push force at 0.5 MPa easily raises or stops heavy pallets on conveyor lines, and the rear flange mount bolts directly to the machine frame.
Clamping & Fixturing
Delivers up to 7068 N of clamping force at 0.9 MPa for CNC weld fixtures and assembly jigs, with magnetic sensors confirming clamp/unclamp position.
Press & Forming Assist
Provides a compact 100 mm power stroke for pressing bushings, rivets, or light forming dies, where the rear flange handles the thrust reaction cleanly.
Is the Airtac SC100 Standard Cylinder SC100X100SFB the Right Cylinder?
Choose the SC100 bore when your application needs roughly 4000 N of force at standard plant pressure. If you can work with about 2500 N, stepping down to an SC80 bore saves space and air consumption. For strokes of 300 mm or more, evaluate side loads carefully—a 25 mm rod may require an external guide or a guided cylinder to prevent bearing wear and rod bending.
For a direct replacement, match five points: 100 mm bore, 100 mm stroke, PT port thread, FB rear flange mounting, and the built-in magnet (-S). The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X100SFB FAQ
At 0.5 MPa it produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder, so mounting dimensions and tie-rod spacing differ. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with matching bore, stroke, PT ports, FB rear flange, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X100SFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.