Airtac SC100 Standard Cylinder SC100X110
The AirTAC Airtac SC100 Standard Cylinder SC100X110 is a genuine double-acting standard air cylinder with a Ø100mm bore and 110mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke110 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X110
The SC100X110 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering a substantial 3927 N of push force when operated at 0.5 MPa. With a 100 mm bore and a 110 mm stroke, this model is built for applications that need high force over a moderate travel distance, such as pressing, clamping, or lifting heavy tooling.
This cylinder features a 25 mm diameter piston rod, PT1/2 ports, and an adjustable air cushion (29 mm length) to decelerate the piston smoothly at end-of-stroke. The body length A is 188 mm, giving a total extended length of approximately 298 mm. It operates on filtered air from 0.15 to 1.0 MPa within a standard temperature range of -20 to +70 °C using its TPU seals.
Airtac SC100 Standard Cylinder SC100X110 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X110 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X110
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X110 Is Used
Pallet Stop & Transfer
Raises and lowers heavy pallet stops or transfers on conveyor lines, where the 3927 N push force at 0.5 MPa easily handles the weight of loaded pallets.
Industrial Pressing
Applies consistent clamping or pressing force for assembly fixtures, glue curing, or light forming operations requiring a short, powerful 110 mm stroke.
Heavy Gate Actuation
Opens and closes heavy safety gates or hopper doors on bulk material handling equipment, using the robust 25 mm rod to manage the inertial loads.
Is the Airtac SC100 Standard Cylinder SC100X110 the Right Cylinder?
When sizing, the SC100 provides 3927 N at 0.5 MPa. If your load requires less force and you want a smaller footprint, the SC80 bore delivers 2513 N at the same pressure. For higher force demands, the SC125 bore steps up to 6136 N. Always ensure the mounting and rod alignment prevent side loads, especially as the 110 mm stroke extends.
For a direct replacement, match five key points: 100 mm bore, 110 mm stroke, PT1/2 port thread, basic (no bracket) mounting, and no magnet. This SC cylinder is a tie-rod design, shorter than an ISO 15552 profile, so it is not a drop-in interchange for those dimensions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X110 FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder of the same bore and stroke. It will only directly interchange with another AirTAC SC100 tie-rod cylinder with matching port thread (PT) and stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.