Airtac SC100 Standard Cylinder SC100X600FA
The AirTAC Airtac SC100 Standard Cylinder SC100X600FA is a genuine double-acting standard air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X600FA
The SC100X600FA is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 600 mm stroke. It generates a substantial push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure, driven by a 25 mm diameter piston rod with M20x1.5 male threads.
This model is configured with a front rectangular flange (FA) for secure panel or bulkhead mounting, using accessory F-SC100FA. The cylinder features a PT1/2 port, adjustable pneumatic cushioning over a 29 mm length, and operates on filtered air from -20 to +70 °C with standard TPU seals. Its body length A is 188 mm, resulting in a total extended length of approximately 788 mm.
Airtac SC100 Standard Cylinder SC100X600FA Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X600FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X600FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X600FA Is Used
Pallet Transfer Systems
Pushes heavy pallets between conveyor lanes with 3927 N of force at 0.5 MPa, using the front flange mount for rigid alignment to the conveyor frame.
Press-Fit Assembly Fixtures
Generates up to 7068 N at 0.9 MPa for pressing bearings or bushings into housings, with the 600 mm stroke accommodating deep component insertion.
Baler Door Actuation
Operates heavy safety gates or baler compression doors, where the front flange provides a stable mounting face and the tie-rod construction allows for field serviceability.
Is the Airtac SC100 Standard Cylinder SC100X600FA the Right Cylinder?
Select the SC100 when your application needs roughly 4000 N of force at standard plant pressure; for lower force requirements around 2500 N, step down to the SC80 bore. For strokes of 600 mm, always assess side-load conditions—a 25 mm rod extending this far is vulnerable to bending under lateral force. Use an external linear guide or a guided cylinder if side loads are present.
To guarantee a drop-in replacement, match five key points: 100 mm bore, 600 mm stroke, PT1/2 port thread, FA front flange mounting, and the absence of a magnet. This cylinder is a genuine AirTAC tie-rod design, not an ISO 15552 profile cylinder, so dimensional interchangeability is limited to other AirTAC SC100 tie-rod units.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X600FA FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than a comparable ISO 15552 profile cylinder. It is a direct dimensional match only for another AirTAC SC100 tie-rod cylinder with the same stroke, port thread, and FA front flange mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X600FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.