Airtac SC100 Standard Cylinder SC100X930SH
The AirTAC Airtac SC100 Standard Cylinder SC100X930SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 930mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke930 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X930SH
The SC100X930SH is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 930 mm stroke suits long-travel material handling and actuator tasks. The 100 mm bore uses a 25 mm diameter piston rod with M20x1.5 threads and PT1/2 ports. Body length A is 188 mm, giving an extended length of approximately 1118 mm.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, simplifying position feedback. The -H suffix specifies Viton (FKM) seals, shifting the operating temperature range to 0 to +150 °C for hot or aggressive environments. As a tie-rod cylinder, it is shorter than an equivalent ISO 15552 profile and is not dimensionally interchangeable with that standard.
Airtac SC100 Standard Cylinder SC100X930SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X930SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 930 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X930SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×930 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X930SH Is Used
Long-Stroke Conveyor Gates
The 930 mm stroke and 3927 N push force at 0.5 MPa operate heavy diverter gates and stops on wide conveyor lines. Viton seals withstand washdown and high-temperature environments up to 150 °C.
Hot Press Actuation
Delivers 7068 N of force at 0.9 MPa for platen movement in heated laminating or forming presses. The built-in magnet enables closed-loop position sensing with CMSG/DMSG sensors.
Pallet Transfer Systems
Moves pallets across long transfer stations. The tie-rod design provides robust service, and the adjustable air cushion decelerates the 930 mm stroke smoothly, protecting end-of-travel components.
Is the Airtac SC100 Standard Cylinder SC100X930SH the Right Cylinder?
Choose the SC100 bore for applications needing 3927 N at 0.5 MPa. If your force requirement is lower, the SC80 bore provides 2513 N at the same pressure. For higher force, the SC125 bore offers 6136 N. At a 930 mm stroke, the 25 mm rod is subject to bending under side loads; use an external guide or a guided cylinder if the load is not purely axial.
For a direct replacement, match five points: 100 mm bore, 930 mm stroke, PT port thread, the built-in magnet (-S) for sensor compatibility, and the Viton seal material for high-temperature operation. This cylinder mounts with the standard tie-rod end nuts; no additional mounting bracket is included.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X930SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X930SH is a double-acting cylinder and will drift or drop if air pressure is lost or the directional valve is centered. To hold a load safely without live pressure, you must add an external mechanical lock, a rod brake, or a pilot-operated check valve. The adjustable air cushion only decelerates the piston at the end of stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X930SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.