The AirTAC Airtac SC32 Standard Cylinder SC32X160 is a genuine double-acting standard air cylinder with a Ø32mm bore and 160mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X160 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the maximum operating pressure of 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it well-suited for light automation tasks requiring controlled end-of-stroke deceleration.
With a body length of 140 mm and a 160 mm stroke, this genuine AirTAC actuator provides a total extended length of approximately 300 mm. The PT1/8 port and M10x1.25 rod thread ensure straightforward pneumatic connections for assembly, sorting, and small-part transfer equipment.
| Model | Airtac SC32 Standard Cylinder SC32X160 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides 402 N of push force at standard shop air for pressing bushings, pins, or connectors into place on benchtop assembly fixtures.
The 160 mm stroke offers sufficient travel to swing a small diverter gate on a compact conveyor line, sorting lightweight packages.
Ideal for actuating pipette tips or moving microplates in diagnostic equipment, where the adjustable cushion protects delicate samples from vibration.
Choose the SC32X160 for light-duty push/pull operations where space is limited. If your application requires more force, consider stepping up to the SC40 series, which provides 628 N at 0.5 MPa. For strokes of 160 mm, the 12 mm rod is adequately supported, but always avoid direct side loading; use an external linear guide if lateral forces are present.
To guarantee a correct replacement, match five key points: 32 mm bore, 160 mm stroke, PT1/8 port thread, basic mounting configuration, and the absence of a built-in magnet. This model is a standard SC tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Only replace an existing SC32 cylinder with the exact same bore, stroke, port, and mounting configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.