The AirTAC Airtac SC32 Standard Cylinder SC32X175STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X175STC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 175 mm stroke suits medium-reach clamping, sorting, and light transfer tasks where a compact tie-rod body is preferred.
This model includes a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the barrel, and ships with a TC centre trunnion mount plus the TCM1 bracket for pivoting applications. The 12 mm diameter rod and 21 mm adjustable air cushion provide smooth deceleration, while the PT1/8 port keeps plumbing simple.
| Model | Airtac SC32 Standard Cylinder SC32X175STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 175 mm stroke and 402 N push force at 0.5 MPa reliably actuates diverter gates on compact conveyor lines, handling light parcels or components with the TC trunnion allowing smooth pivoting motion.
The built-in magnet enables CMSG/DMSG sensors to confirm clamp position. At 724 N max force, it securely holds small workpieces during drilling or light assembly without over-stressing the fixture.
Ideal for laboratory test stands requiring a compact, double-acting cylinder. The adjustable cushion protects the 12 mm rod and end caps during repetitive cycling at speeds up to 800 mm/s.
Choose the SC32 bore for light-duty push/pull up to 724 N at 0.9 MPa. If your load exceeds this, step up to the SC40 bore (628 N at 0.5 MPa) for extra force without a large footprint increase. For a 175 mm stroke, the standard body length A of 140 mm plus stroke gives a total extended length of 315 mm.
When replacing an existing cylinder, match five points: 32 mm bore, 175 mm stroke, PT1/8 port thread, TC centre trunnion mounting (with TCM1 bracket), and the built-in magnet for sensor compatibility. The SC is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC32 units.
Quick checklist
At 0.5 MPa air pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length (A=140 mm for bore 32) than a typical ISO 15552 profile cylinder. It is not dimensionally interchangeable. Use it to replace another AirTAC SC32 with matching stroke, port thread, TC mount, and magnet option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.