The AirTAC Airtac SC32 Standard Cylinder SC32X270 is a genuine double-acting standard air cylinder with a Ø32mm bore and 270mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X270 is a 32 mm bore double-acting pneumatic cylinder providing a 270 mm stroke. At 0.5 MPa it delivers 402 N push force and 345 N pull force, with a maximum push force of 724 N at 0.9 MPa operating pressure.
The 12 mm diameter piston rod features an M10x1.25 thread and the cylinder body length A is 140 mm. Its 21 mm adjustable air cushion decelerates the piston smoothly at stroke end, protecting end caps from impact.
| Model | Airtac SC32 Standard Cylinder SC32X270 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves lightweight components between conveyor lanes with 402 N of push force at standard plant air pressure.
Applies consistent clamping force up to 724 N for holding workpieces during light machining or assembly.
Provides a 270 mm linear stroke for opening and closing test jigs and small press fixtures.
For a step up in force, the 40 mm bore SC40 series provides 628 N push at 0.5 MPa. When mounting this 270 mm stroke cylinder, ensure the rod is aligned with the load to avoid side forces; for strokes over 300 mm consider an external guide. To match an existing SC32X270, confirm bore 32 mm, stroke 270 mm, PT1/8 port thread, basic mounting, and no magnet option.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
No, the SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. It directly replaces another AirTAC SC32 cylinder with the same bore, stroke, and port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.