The AirTAC Airtac SC32 Standard Cylinder SC32X62S is a genuine double-acting standard air cylinder with a Ø32mm bore and 62mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X62S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration across the 62 mm stroke.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. The compact body length A of 140 mm plus stroke keeps the overall envelope short, suiting installations where space is limited.
| Model | Airtac SC32 Standard Cylinder SC32X62S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 62 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×62 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 62 mm stroke and 12 mm rod suit ejecting lightweight plastic or metal components from injection molds or stamping dies, with the magnet enabling end-of-stroke confirmation.
Actuates small diverter flaps on compact conveyor lines. The built-in magnet lets a pair of sensors verify open and closed positions for sequencing logic.
Provides gentle but firm clamping of vials or test tubes in diagnostic instruments. The adjustable cushion protects glassware from impact at stroke end.
Choose the SC32 when the force requirement stays within 402 N at 0.5 MPa. If the load approaches 500-600 N, step up to the SC40 bore (628 N at 0.5 MPa) to maintain speed and avoid running near the pressure limit. For replacement, match five points: 32 mm bore, 62 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting style. The sensor-ready barrel means any existing CMSG/DMSG/EMSG switches will transfer directly.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet on the piston. AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors clamp onto the barrel tie-rods and detect the magnet through the tube wall, giving reliable position feedback without brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.