The AirTAC Airtac SC32 Standard Cylinder SC32X800TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X800TC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. With an 800 mm stroke and a 12 mm diameter piston rod, this model is well-suited for medium-reach linear tasks in automated machinery where a pivoting mount is required.
This variant includes the TC centre trunnion mounting (supplied with the TCM1 bracket, part code F-SC32TC), allowing the cylinder to pivot during operation to accommodate angular movement. The body length A is 140 mm, and the adjustable pneumatic cushion (21 mm) decelerates the piston at end-of-stroke to reduce impact and noise.
| Model | Airtac SC32 Standard Cylinder SC32X800TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pivoting diverter gates on packaging conveyors, where the centre trunnion mount allows the cylinder to swing as it extends and retracts to redirect products between lanes.
Clamping and positioning of lightweight components in assembly fixtures, using the 800 mm reach to access parts on a deep worktable with controlled pneumatic force.
Actuating chutes or flaps in seed sorting equipment, where the adjustable cushioning provides smooth end-of-stroke operation and the trunnion mount handles the arcing motion.
For applications needing less force, the SC32 series provides a compact solution; stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. At an 800 mm stroke, this cylinder's rod is significantly extended. Ensure side loads are minimal or use an external guide rail to prevent rod bending and premature bearing wear. For a direct replacement, match the 32 mm bore, 800 mm stroke, PT port thread, TC centre trunnion mount, and the non-magnetic piston configuration.
Quick checklist
At 0.5 MPa, the SC32X800TC provides 402 N extending and 345 N retracting. At the maximum operating pressure of 0.9 MPa, the extending force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
For a long 800 mm stroke on a 12 mm rod, side loading must be avoided. Use an external linear guide or rod support to prevent bending. Ensure the replacement cylinder matches the 32 mm bore, 800 mm stroke, PT ports, and TC centre trunnion mount with the TCM1 bracket.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.