The AirTAC Airtac SC32 Standard Cylinder SC32X880 is a genuine double-acting standard air cylinder with a Ø32mm bore and 880mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X880 is a double-acting tie-rod cylinder with a 32 mm bore and an 880 mm stroke, delivering a push force of 402 N at 0.5 MPa (up to 724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for medium-length linear moves.
With a body length A of 140 mm and PT1/8 ports, this cylinder is notably shorter than an equivalent ISO 15552 profile, making it suitable where space is constrained. The standard TPU seals offer an operating temperature range of -20 to +70 °C, and the piston rod features an M10x1.25 thread for easy attachment.
| Model | Airtac SC32 Standard Cylinder SC32X880 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 880 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×880 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushing or diverting lightweight packages on a conveyor line where a compact footprint is essential and the 402 N force at 0.5 MPa is sufficient.
Operating a clamping or pressing fixture in a small assembly cell, using the 880 mm stroke to reach across a worktable.
Actuating a sorting gate or chute diverter on a seed or grain handling system, where the tie-rod design withstands dusty environments.
For applications requiring slightly more force, the SC40 bore provides 628 N of push force at 0.5 MPa. If a shorter stroke is needed, the SC32 is available in standard strokes down to 25 mm. At 880 mm, this stroke is within the 1000 mm maximum standard stroke for the 32 mm bore.
When replacing an existing cylinder, match five key points: 32 mm bore, 880 mm stroke, PT1/8 port thread, basic mounting (no bracket), and the absence of a magnet. For strokes over 300 mm, ensure the rod is not subjected to side loads; use an external guide or linear bearing to prevent rod bending and premature seal wear.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 cylinder of the same bore and stroke, so it is not dimensionally interchangeable. It replaces another AirTAC SC32 cylinder with the same specifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.