Airtac SC50 Standard Cylinder SC50X1360S
The AirTAC Airtac SC50 Standard Cylinder SC50X1360S is a genuine double-acting standard air cylinder with a Ø50mm bore and 1360mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke1360 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
About the Airtac SC50 Standard Cylinder SC50X1360S
The AirTAC SC50X1360S is a double-acting single-rod pneumatic cylinder with a 50 mm bore and an extended 1360 mm stroke, built with a tie-rod construction that is shorter than an ISO 15552 profile. At 0.7 MPa it delivers 1374 N of push force, and the 20 mm diameter rod with M16x1.5 male thread handles linear motion tasks where a long reach is essential.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for contactless position sensing. Because the 1360 mm stroke exceeds the 1200 mm maximum standard stroke for bore 50, this is a non-standard made-to-order length. The adjustable pneumatic cushion (21 mm) decelerates the piston at end-of-travel, and the PT1/4 port supplies filtered air at 0.15–1.0 MPa.
Airtac SC50 Standard Cylinder SC50X1360S Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X1360S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 1360 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X1360S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×1360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X1360S Is Used
Long-Reach Part Transfer
The 1360 mm stroke pushes or pulls components across wide conveyor gaps or between distant stations, with the magnetic piston enabling end-of-stroke confirmation via barrel-mounted sensors.
Automated Gluing & Dispensing
Delivers a consistent 1374 N push at 0.7 MPa to depress a dispensing head along an extended linear path, suitable for long bead applications on large panels.
Vertical Lifter Assist
Used in a vertical orientation to raise or lower a light payload over a long distance; an external guide is essential to prevent rod buckling under compressive load.
Is the Airtac SC50 Standard Cylinder SC50X1360S the Right Cylinder?
Choose the SC50 bore when your application needs roughly 982 N push at 0.5 MPa; if you require more force, stepping up to the SC63 bore provides 1559 N at the same pressure. For strokes of 300 mm or more, and especially at this 1360 mm length, side loads become a critical concern—the 20 mm rod can bend under lateral force. Always use an external linear guide or a guided cylinder assembly to protect the rod bearing and piston seals from premature wear.
When replacing an existing cylinder, match five points: 50 mm bore, 1360 mm stroke, PT1/4 port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting configuration. The SC body length A is 150 mm, giving a total extended length of approximately 1510 mm.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X1360S FAQ
At 0.7 MPa operating pressure, the theoretical push force is 1374 N. The pull force on the return stroke is 825 N at the same pressure, due to the area reduction from the 20 mm rod.
No. The maximum standard stroke for a 50 mm bore SC cylinder is 1200 mm. The 1360 mm stroke is a non-standard, made-to-order length, which may affect lead time. The total extended length is approximately 1510 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X1360S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.