Airtac SC80 Standard Cylinder SC80X113S
The AirTAC Airtac SC80 Standard Cylinder SC80X113S is a genuine double-acting standard air cylinder with a Ø80mm bore and 113mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke113 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X113S
The SC80X113S delivers 2513 N of push force at 0.5 MPa, making it a strong mid-range actuator for pressing, clamping, and material handling. With an 80 mm bore and 113 mm stroke, this double-acting cylinder uses a 25 mm diameter piston rod and features a 28 mm adjustable air cushion at each end to decelerate the load smoothly.
This model includes the -S suffix for a built-in magnet, allowing CMSG, DMSG, or EMSG sensors to mount directly onto the tie-rod barrel for non-contact position sensing. The body length A is 182 mm, giving a total extended length of approximately 295 mm, and it operates on filtered air from 0.15 to 1.0 MPa.
Airtac SC80 Standard Cylinder SC80X113S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X113S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 113 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X113S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×113 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X113S Is Used
Conveyor Diverting
The 2513 N push force at 0.5 MPa easily actuates diverter gates on medium-duty package handling lines, with the built-in magnet confirming gate position via barrel-mounted sensors.
Pneumatic Pressing
Ideal for light assembly presses and riveting stations where the 113 mm stroke provides sufficient daylight and the adjustable cushion protects tooling at end-of-stroke.
Sensor-Controlled Clamping
The -S magnet enables precise clamp/unclamp confirmation in automated CNC fixtures, ensuring the part is secure before machining begins.
Is the Airtac SC80 Standard Cylinder SC80X113S the Right Cylinder?
Choose the SC80 when your application needs around 2513 N at 0.5 MPa. If you require less force, the SC63 delivers 1559 N at the same pressure in a lighter package; for heavier loads, the SC100 provides 3927 N. The 113 mm stroke is a standard length within the 1500 mm maximum for this bore.
For a direct replacement, match five key points: 80 mm bore, 113 mm stroke, PT3/8 port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting configuration. If your stroke exceeds 300 mm, consider an external guide or a guided cylinder to protect the 25 mm rod from bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X113S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet inside the piston, designed specifically for AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors. These sensors clamp directly onto the cylinder's tie-rod barrel without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X113S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.