Airtac SC80 Standard Cylinder SC80X130FA
The AirTAC Airtac SC80 Standard Cylinder SC80X130FA is a genuine double-acting standard air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X130FA
The AirTAC SC80X130FA is an 80 mm bore, 130 mm stroke double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa. It features a 25 mm diameter piston rod, PT3/8 ports, and a 28 mm adjustable air cushion for smooth end-of-stroke deceleration. The front rectangular flange (FA) mount is integrated for secure panel or bulkhead attachment.
With a body length of 182 mm, the total extended length is approximately 312 mm. This model operates on filtered air from 0.15 to 1.0 MPa and uses standard TPU seals for a temperature range of -20 to +70 °C. It is a genuine AirTAC tie-rod cylinder, built for reliable industrial automation.
Airtac SC80 Standard Cylinder SC80X130FA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X130FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X130FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X130FA Is Used
Clamping & Fixturing
The 2513 N force at 0.5 MPa makes this cylinder ideal for robust workpiece clamping in CNC machining centres and welding fixtures, where the front flange mount provides rigid, space-efficient attachment.
Part Stops & Gates
Deploy the SC80X130FA as a pneumatic gate or part stop on conveyor lines. The 130 mm stroke offers ample travel to divert or halt medium-weight packages, and the adjustable cushion reduces impact noise.
Press & Assembly Tools
Used in small pneumatic presses or assembly stations, this cylinder provides a controlled 2513 N push for bearing insertion, riveting, or forming operations, with the FA flange ensuring stable alignment under load.
Is the Airtac SC80 Standard Cylinder SC80X130FA the Right Cylinder?
Select the SC80 bore when your application requires push forces around 2513 N at 0.5 MPa. If you need more force, step up to the SC100 bore which provides 3927 N; for a lighter, more compact solution, the SC63 bore delivers 1559 N. The FA front flange mount (F-SC80FA) allows direct mounting to a fixed panel, ensuring the cylinder body is supported at the rod end.
For this 130 mm stroke, side loads are typically not a concern, but always ensure the load is guided externally if any lateral force is present. When replacing, match the 80 mm bore, 130 mm stroke, PT3/8 port thread, FA mounting, and standard non-magnetic piston to guarantee a drop-in fit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X130FA FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. For a direct replacement, match another AirTAC SC tie-rod cylinder with an 80 mm bore, 130 mm stroke, PT3/8 ports, and FA front flange mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X130FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.