Airtac SC80 Standard Cylinder SC80X600N
The AirTAC Airtac SC80 Standard Cylinder SC80X600N is a genuine double-acting standard air cylinder with a Ø80mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X600N
The SC80X600N is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 600 mm stroke. At 0.5 MPa air pressure, it generates 2513 N of push force and 2268 N on the pull stroke, making it a capable mid-range actuator for industrial automation tasks.
This model is fitted with NBR (nitrile) seals as standard, suited for general-purpose factory air. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide robust guidance and smooth deceleration. Its PT1/4 port and M20x1.5 rod thread ensure straightforward pneumatic connections.
Airtac SC80 Standard Cylinder SC80X600N Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X600N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X600N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X600N Is Used
Belt Conveyor Diverter
The 2513 N push force at 0.5 MPa easily operates a gate or diverter arm on a medium-duty package sorting line, directing cartons between lanes with a 600 mm reach.
Material Feed System
Ideal for pushing heavy sheet material or blanks into a stamping press or CNC machine. The long 600 mm stroke provides the necessary reach to clear the machine bed.
Pallet Stop and Release
Used in gravity or powered roller conveyors to stop and release heavy pallets. The NBR seals offer good wear resistance in dusty warehouse environments.
Is the Airtac SC80 Standard Cylinder SC80X600N the Right Cylinder?
For a step up in force, the 100 mm bore SC100 series offers 3927 N push at the same pressure. If a shorter, more compact cylinder is acceptable, the 63 mm bore SC63 delivers 1559 N. When selecting, ensure a full match on all five key points: 80 mm bore, 600 mm stroke, PT port thread, NBR seal material, and the basic (no bracket) mounting style.
With a 600 mm stroke, the extended piston rod is long and must be protected from side loads. Any lateral force on the rod end can cause bending or premature bearing wear. For applications where the rod must guide or support a load, use an external linear guide rail or switch to a guided cylinder to prevent damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X600N FAQ
At the standard operating pressure of0.5 MPa, the cylinder produces 2513 N of force when extending (push) and 2268 N when retracting (pull). The maximum theoretical force at1.0 MPa is 513 kgf.
Yes, provided the original was an AirTAC SC tie-rod cylinder with an 80 mm bore, 600 mm stroke, PT ports, and basic mounting. The 'N' suffix here specifies NBR seals, so ensure the original's seal material is also compatible with your application's temperature and fluid requirements.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X600N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.