Airtac SC80 Standard Cylinder SC80X60TC
The AirTAC Airtac SC80 Standard Cylinder SC80X60TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X60TC
The SC80X60TC is an 80 mm bore, 60 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod family. At 0.5 MPa it generates 2513 N pushing force, making it a capable mid-range actuator for compact linear moves. The 25 mm diameter piston rod and 28 mm air cushion provide robust deceleration for the 60 mm stroke.
This model is configured with a TC centre trunnion mount, supplied with the TCM1 bracket (part code F-SC80TC), which allows the cylinder to pivot during operation. It uses the standard PT port thread and TPU seals for a -20 to +70 °C operating range. The total extended body length is approximately 242 mm.
Airtac SC80 Standard Cylinder SC80X60TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X60TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X60TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X60TC Is Used
Conveyor Diverters
The 60 mm stroke and pivoting trunnion mount are well-suited for compact diverter gates on packaging lines, where the cylinder body needs to swing through an arc.
Clamping Fixtures
Delivers a strong 2513 N clamping force at 0.5 MPa for holding parts in machining or welding jigs, with the trunnion mount allowing the cylinder to self-align.
Process Valve Actuation
The robust 25 mm rod and adjustable cushion handle the repetitive end-of-stroke impacts common in actuating ball or butterfly valves, with the TC mount simplifying installation on a pivot bracket.
Is the Airtac SC80 Standard Cylinder SC80X60TC the Right Cylinder?
Choose the SC80X60TC when your application needs a pivoting mount and around 2500 N of force at standard plant air pressure. If you require higher force, stepping up to the SC100 bore provides 3927 N push at 0.5 MPa; for a lighter, more compact solution, the SC63 bore delivers 1559 N.
To guarantee a correct replacement, match five key points: 80 mm bore, 60 mm stroke, PT port thread, centre trunnion (TC) mounting with the TCM1 bracket, and the absence of a built-in magnet. The TC mount is ideal for swinging loads, as it allows the cylinder body to pivot around the trunnion axis, preventing rod bending from misalignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X60TC FAQ
At the standard operating pressure of 0.5 MPa, the cylinder provides a pushing force of 2513 N and a pulling force of 2268 N. The maximum theoretical force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is shorter in overall length than an ISO 15552 profile cylinder of the same bore and stroke. It is not dimensionally interchangeable. It will only directly replace another AirTAC SC80 tie-rod cylinder with matching bore, stroke, PT ports, and TC centre trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X60TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.