Airtac SC80 Standard Cylinder SC80X610S
The AirTAC Airtac SC80 Standard Cylinder SC80X610S is a genuine double-acting standard air cylinder with a Ø80mm bore and 610mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke610 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X610S
The AirTAC SC80X610S is a double-acting tie-rod cylinder with an 80 mm bore and a 610 mm stroke, factory-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors. Its 25 mm diameter piston rod and PT3/8 ports deliver a push force of 2513 N at 0.5 MPa, rising to 4523 N at the maximum operating pressure of 0.9 MPa.
With a body length A of 182 mm and an adjustable air cushion of 28 mm at each end, this cylinder decelerates the piston smoothly to reduce end-of-stroke impact. The 610 mm stroke is well within the 1500 mm maximum standard stroke for the 80 mm bore, making it a standard-configuration unit ready for immediate integration into automated machinery requiring mid-range linear thrust.
Airtac SC80 Standard Cylinder SC80X610S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X610S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X610S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X610S Is Used
Material Handling Pusher
The 610 mm stroke and 2513 N push force at 0.5 MPa make this cylinder ideal for diverting or pushing medium-weight packages and totes across roller conveyors in distribution centres.
Automated Assembly Clamping
With a built-in magnet for end-of-stroke sensing, the SC80X610S confirms clamp engagement on large assembly fixtures, ensuring consistent part alignment during welding or fastening operations.
Pallet Layer Positioning
The 4523 N thrust at 0.9 MPa handles the force needed to slide or position a full layer of goods on a palletising station, while the adjustable cushion protects the load from jarring stops.
Is the Airtac SC80 Standard Cylinder SC80X610S the Right Cylinder?
Select the SC80 bore when your application needs a push force around 2513 N at 0.5 MPa. If the load is lighter, stepping down to the SC63 bore reduces the push force to 1559 N at the same pressure, saving space and air consumption. For heavier loads, the SC100 bore provides 3927 N of push force at 0.5 MPa.
At a 610 mm stroke, the unsupported piston rod is subject to bending under side loads. Install an external linear guide or rod-alignment coupler to protect the rod bearing and seals, or consider a guided cylinder for applications with significant off-axis forces. For a direct replacement, match the 80 mm bore, 610 mm stroke, PT3/8 port thread, basic mounting configuration, and the built-in magnet (-S) for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X610S FAQ
At the standard operating pressure of 0.5 MPa, the cylinder delivers 2513 N of push force and 2268 N of pull force on the retract stroke. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The -S suffix in SC80X610S indicates a built-in magnet on the piston, allowing you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X610S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.