Airtac SC80 Standard Cylinder SC80X710TC
The AirTAC Airtac SC80 Standard Cylinder SC80X710TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 710mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke710 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X710TC
The SC80X710TC is an 80 mm bore, 710 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod family. It generates a substantial 2513 N of push force at 0.5 MPa (4523 N at the maximum operating pressure of 0.9 MPa), making it a capable actuator for mid-to-heavy linear motion tasks. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide robust guidance and smooth deceleration for the 710 mm travel.
This model is configured with the TC centre trunnion mount, supplied complete with the TCM1 bracket (part code F-SC80TC). The trunnion allows the cylinder body to pivot, accommodating swinging or arcing loads without inducing bending stress on the rod. It features standard PT ports (PT3/8) and TPU seals for a standard operating temperature range of -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X710TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X710TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X710TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X710TC Is Used
Conveyor Diverters
The 710 mm stroke and pivoting trunnion mount allow this cylinder to actuate diverter gates on wide conveyor lines, smoothly redirecting packages or pallets between lanes.
Clamp & Fixture Actuation
With over 4500 N of force at 0.9 MPa, it powers heavy-duty welding or assembly fixtures, where the trunnion mount lets the cylinder swing clear for part loading and unloading.
Agricultural Machinery
Ideal for controlling chutes, hopper doors, or boom adjustments on farm equipment, where the robust tie-rod construction and pivoting action handle dusty, high-vibration environments.
Is the Airtac SC80 Standard Cylinder SC80X710TC the Right Cylinder?
For applications requiring less force, consider stepping down to the 63 mm bore SC63 series, which provides 1559 N of push at 0.5 MPa. If higher force is needed, the 100 mm bore SC100 series offers 3927 N at the same pressure. At a 710 mm stroke, the unsupported rod length is significant; any side load will create a bending moment on the rod bearing. For non-linear load paths, use an external guide rail or a guided cylinder to protect the rod and seals from premature wear.
To ensure a direct replacement, match five key specifications: bore (80 mm), stroke (710 mm), port thread (PT3/8), the TC centre trunnion mounting accessory (F-SC80TC), and the absence of a built-in magnet. This cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X710TC FAQ
At the standard operating pressure of 0.5 MPa, the cylinder produces 2513 N on the push stroke and 2268 N on the pull stroke. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than a comparable ISO 15552 cylinder. It is a direct replacement only for another AirTAC SC80 cylinder with the same 710 mm stroke, PT3/8 ports, and TC centre trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X710TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.