The AirTAC AirTAC SDA32X110 Compact Cylinder | 32mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 110mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA32X110 is a double-acting, single-rod compact cylinder engineered to deliver a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. Its short riveted assembly merges the barrel, rear cover, and piston to drastically reduce axial mounting depth compared to conventional round-body units. This space-saving footprint makes it highly effective for machinery where installation envelopes are tight.
This specific configuration features a 110 mm stroke, a 12 mm piston rod, and PT1/8 air ports. The bore interior is hard-anodized and uses a two-way piston seal for longevity. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning high-energy cycles may require an external shock absorber. This SKU lacks a piston magnet, so it cannot host magnetic switches without upgrading to the -S option.
| Model | AirTAC SDA32X110 Compact Cylinder | 32mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Pushes corrugated cartons onto secondary packaging lines using a 110 mm stroke, relying on the 402.1 N push force to overcome side friction without bouncing the load.
Extracts routed printed circuit boards from a fixture, where the compact riveted body minimizes interference with overhead tooling changers.
Shifts warp beams laterally across a creel, using the 12 mm rod to push the cradle while the short body avoids encroaching on the walking aisle.
When sizing this unit, evaluate stepping down to the SDA25, which provides 245.4 N of push force at 0.5 MPa, or moving up to the SDA40, which yields 628.3 N at the same pressure. For the current 32 mm bore, the computed safe working load is approximately 241 N (about 60% of the 402.1 N figure), translating to a vertical lift capacity of roughly 20.5 kg with a 2:1 safety margin. To finalize your order, confirm the 32 mm bore, 110 mm stroke, PT1/8 port, female rod thread (M6x1.0), and the absence of a magnet. Keep in mind that a standard cylinder drifts when air pressure is lost or the valve is centered; the fixed bumper only slows the piston near the stroke end and does not function as a locking brake. If your application must hold a load without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This double-acting cylinder provides a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push increases to 563 N. The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa.
No, this specific SKU does not include a piston magnet, so it cannot trigger AirTAC reed or electronic switches. The body features sensor grooves, but you must specify the -S option (e.g., SDA32X110S) to add the internal magnet required for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.