
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20 is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M5x0.8) screw, you shorten the forward end position on-site across a 10 to 30 mm window, eliminating the need for shims or part swaps during commissioning. Retract remains full length.
The short riveted body saves axial mounting depth where round-body or profile units will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 10 to 30 mm extend stop on delicate machining fixtures to avoid crushing thin-walled parts during setup.
Adjust the forward reach on the fly for varied product sizes on a test assembly line without changing out actuators.
When sizing this 12 mm bore actuator, consider the adjacent SDAJ16, which raises the 0.5 MPa push to 100.5 N for heavier resistance. Choose this unit when trial positioning or frequent changeover requires on-machine stroke tuning between 10 and 30 mm.
Confirm the bore, 30 mm maximum stroke, 20 mm window, M5x0.8 port, and female rod-end thread (M3x0.5) fit your envelope. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, specify an external rod lock or pilot-operated check valve. This SKU lacks the -S magnet and cannot take a switch.
Quick checklist
Operating pressure ranges from 0.15 to 1.0 MPa.
The external M5x0.8 screw mechanically limits the extend stroke, allowing you to dial the end position anywhere between 10 and 30 mm. It does not alter force and is not a mid-stroke lock; the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.