
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30SB is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-30SB is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the extend position from 0 to 30 mm directly on the machine, eliminating shims.
Its short riveted body saves axial mounting depth where larger profile cylinders cannot fit. This unit includes a built-in magnet for AirTAC reed or electronic switches and a male M5x0.8 piston rod. End shock is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for small machining fixtures where the male rod must contact a delicate part. Turn the M5x0.8 screw to dial the 0-30 mm extend stop, preventing over-travel without changing parts.
Useful in lab automation for trial positioning. The compact riveted body fits tight enclosures, while the reed or electronic switch confirms the exact extend endpoint during testing.
Ideal for electronics lines needing frequent changeover.
When sizing, verify if the 12 mm bore fits your load. Since 12 mm is the smallest bore, there is no smaller option. This model is ideal for setups requiring frequent on-machine stroke tuning. Remember that a plain cylinder does not hold its load on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, stroke, window, M5x0.8 port, magnet, and male rod thread.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The R (M5x0.8) screw shortens the extend stop by up to 30 mm, giving a usable extend range of 0-30 mm; retract remains full stroke. The -S code means it has a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.