
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20 is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M5x0.8 adjuster screw lets you dial the outward stroke anywhere between 15 and 35 mm directly on the machine, eliminating the need for shims.
Its short riveted body drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot. The bore uses an M5x0.8 air port and a 6 mm rod. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 15-35 mm extend stop on small machining fixtures to accommodate varying part tolerances without fabricating new spacers.
Adjust the stroke depth on compact diverting gates during product format changes to maintain precise package routing.
This model is ideal for operators needing frequent on-site stroke tuning during setup or product changeovers. Confirm your requirements for a 35 mm maximum stroke, 20 mm adjust window, M5x0.8 port, female rod thread, and no magnet. Remember that a plain cylinder drifts when air is lost; integrate an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ12 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj12-adjustable-cylinder
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The M5x0.8 R screw mechanically shortens the extend stroke from the 35 mm maximum down to 15 mm without changing the force. It is a stop, not a lock; the cylinder will drift on air loss, so use a pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.