verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.

  • BoreØ12 mm
  • Max stroke35 mm
  • Adjustable range15–35 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$29.06 $36.56Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ12 stroke, mounting and version on one page All SDAJ12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B

The AirTAC SDAJ12X35-20B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 15 and 35 mm directly on the machine, eliminating the need for shims or part swaps.

This variant features a male M5x0.8 piston rod thread and a short riveted body that minimizes axial mounting depth in tight spaces. End-of-travel shock is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support position sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ12 mm
Max stroke35 mm
Adjustable range15 – 35 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø12mm)

PressurePush forcePull force
0.5 MPa42 N42 N
0.7 MPa59 N—
Max (@1.0 MPa)9 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B

SDAJCompact double-acting cylinder with adjustable stroke.
12Bore size in mm.
×35Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B Is Used

precision_manufacturing

Micro-Clamp Dial-In

Fine-tune the 15 to 35 mm extend stop during initial tooling setup to achieve the exact clamping force on delicate electronic components without machining new spacers.

view_module

Small Part Ejector

Vary the ejection stroke on-the-fly for different product sizes on a compact assembly line, utilizing the short riveted body to fit within dense machine frames.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B the Right Cylinder?

When sizing this 12 mm bore actuator, consider the neighbouring SDAJ16, which raises the 0.5 MPa push force to 100.5 N for heavier resistance. Downgrading is not an option as this is the smallest available bore.

Choose this male-rod (-B) configuration if your tooling requires an M5x0.8 external thread instead of the default female M3x0.5. The on-site adjustability is ideal for trial positioning and frequent changeovers. Remember that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end of the stroke. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ12 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj12-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B FAQ

It operates at speeds between 30 and 500 mm/s.

Turning the R (M5x0.8) screw mechanically shortens the extend stroke by up to 20 mm, allowing you to set the stop anywhere between 15 and 35 mm without altering the force. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ12X35-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.