
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-20S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 15 and 35 mm without swapping shims or parts, making it ideal for tight prototype setups. The riveted body drastically reduces axial mounting depth where larger profile cylinders cannot fit.
This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches. End shock is managed by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for small machining fixtures where the 15-35 mm extend stop is dialed via the M5 screw to dial out part tolerances without remachining stops.
Fits into tight electronics assembly arrays; the short riveted body saves axial space while the magnet enables electronic switch feedback for cycling.
Choose this 35 mm maximum stroke model with the 20 mm window if your fixture requires frequent on-site stroke tuning.
Confirm your parameters: 12 mm bore, 15-35 mm adjustable extend range, M5x0.8 port, and a female M3x0.5 rod-end thread. The -S code ensures switch readiness, but remember a plain cylinder does not hold position on air loss or valve centering—the fixed bumper only decelerates near the end. For suspended loads without live pressure, specify an external rod lock or pilot-operated check valve.
Quick checklist
The air port is M5x0.8.
Turning the R (M5x0.8) screw shortens the extend end position from the 35 mm maximum down to 15 mm; retract remains full stroke. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.