verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20 is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.

  • BoreØ12 mm
  • Max stroke40 mm
  • Adjustable range20–40 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$30.00 $37.50Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ12 stroke, mounting and version on one page All SDAJ12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20

The AirTAC SDAJ12X40-20 is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop directly on your machine. You can set the outward travel anywhere from 20 to 40 mm without swapping shims or parts, making it ideal for trial positioning and rapid changeovers. The retract stroke remains full length.

The short riveted body minimizes axial mounting depth where space is tight, while a fixed NBR bumper decelerates the stroke end. This unit has no piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ12 mm
Max stroke40 mm
Adjustable range20 – 40 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø12mm)

PressurePush forcePull force
0.5 MPa42 N42 N
0.7 MPa59 N—
Max (@1.0 MPa)9 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20

SDAJCompact double-acting cylinder with adjustable stroke.
12Bore size in mm.
×40Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20 Is Used

precision_manufacturing

Micro-Clamp Tuning

Dial the extend stop from 20 to 40 mm to perfectly set clamping depth on delicate electronic components without machining new spacers.

view_module

Small Part Ejection

Adjust the ejection reach on the fly during product changeovers to accommodate varying small part geometries on a compact assembly line.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20 the Right Cylinder?

When sizing this 12 mm bore actuator, evaluate your force requirements carefully. Since 12 mm is the smallest available SDAJ option, there is no smaller bore to step down to.

Choose this specific SKU if your fixture requires on-site stroke tuning between 20 and 40 mm. Confirm your setup needs an M5x0.8 air port and a female M3x0.5 rod-end thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ12 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj12-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20 FAQ

The theoretical maximum push force is 12 kgf at 1.0 MPa.

An external M5x0.8 adjuster screw acts as a mechanical stop, allowing you to shorten the extend stroke by up to 20 mm on-site. This sets the usable extend range between 20 and 40 mm. The adjustment alters only the stop position, not the force output, and it does not lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ12X40-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.