verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke35 mm
  • Adjustable range25–35 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$29.06 $36.56Save 20% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B

The AirTAC SDAJ16X35-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 25 to 35 mm directly on the machine, eliminating shims or part swaps during changeovers.

This variant uses a male M5x0.8 piston rod thread and a short riveted body to minimize axial mounting depth in tight assemblies. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without changing to the -S option.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke35 mm
Adjustable range25 – 35 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×35Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B Is Used

precision_manufacturing

Probe Card Alignment

Dial the extend stop between 25 and 35 mm to set exact probe contact depth without machining custom spacers.

swap_horiz

Quick-Change Tooling

Turn the M5x0.8 adjuster screw to accommodate varying part heights during production line changeovers in seconds.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B the Right Cylinder?

When sizing this 16 mm bore, verify your force requirements against adjacent models.

Choose this unit if your fixture requires on-site stroke tuning within the 25 to 35 mm window. Confirm the 16 mm bore, 35 mm max stroke, 10 mm adjustability, M5x0.8 port, and male M5x0.8 rod thread suit your tooling. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates the end of travel and does not lock the load. For secure holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

The M5x0.8 screw mechanically shortens the extend stroke from the 35 mm maximum down to 25 mm. It does not alter force or lock the piston mid-stroke. Because this SKU lacks the -S magnet, it cannot be used with reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X35-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.